A fire alarm system
is an active fire protection system that detects
fire or the effects of fire, and as a result
provides one or more of the following: notifies
the occupants, notifies persons in the surrounding
area, summons the fire service, and controls
all the fire alarm components in a building.
Fire alarm systems can include alarm initiating
devices, alarm notification appliances, control
units, fire safety control devices, annunciators,
power supplies, and wiring.
Ziton Paradigm-X series control panels represent
a new level in sophisticated technology for analogue
addressable panels. A range of panels provide
Paradigm-X technology for application ranging
from small 2-loop systems, to the largest multi-loop
systems with many panels and thousands of sensors.
These control panels utilize
the latest 32-bit embedded microprocessor technology,
with a totally new architecture, to provide
greater functionality than ever before, in a
compact and efficient range of panels. These
panels are modular in design, enabling systems
to be tailored to suit any customer requirement,
using standard off-the-shelf modules. A wide
range of standard add-on modules and the highest
level of software programmability in the industry
ensure a total match to any requirement.
Features include peer-to-peer
networking, full configuration programmability,
high-speed data links, modular expandability,
permanent "flash" memory and more.
Paradigm-X panels have powerful management capabilities
and provide effective control for small and
large systems. The fuzzy-logic software incorporated
into these panels is specifically designed to
operate with Paradigm-X multisensors, providing
a highly sophisticated fully compatible fire
detection system, from a single source.
ZP3 Analogue addressable fire detection and alarm
system
The ZP3 excels in performance, scaleability, integration,
reliability, maintenance and simple operation.
The ZP3 fire alarm panel is available in 1,2 and
4 loops versions, supporting up to 508 sensors
per panel. Built-in peer-to-peer networking capability
allows up to 32 panels and over 16000 sensors
to be connected together, providing true scaleability
from small to very large systems. Flexible installation,
using both wired and radio-based wireless techniques,
make the ZP3 system the ideal choice for both
new buildings and existing installations.
Connection to building management
systems, graphic displays, radio-pagers and
other systems are fully supported using open
protocols.
A full range of high-performance
analogue addressable sensors, including single
and combination-sensors are supported. Adjustable
sensitivity, alarm verification and pre-alarm,
provide early warning without false alarms.
ZP5 Analogue addressable fire detection and alarm
system
The ZP5 fire alarm panel is available in 2, 4
& 8 loop version, supporting upto 1016 sensors
per panel. This panel can be connected to another
by networking and also this has gas systems interface
to control water / gas based extinguishing systems.
Apart from the built in printer these panel can
be connected to standalone computer and printers.
Panels are fully supporting with European standard
EN54.
The ZP continuos "active" protocol provides
complete reliability at all times. Automatic checking
of wiring and sensors, corrupt data detection
and disconnection of faulty or corrupt zones is
supported. Built-in diagnostics improves the level
of maintenance and reduces costs. Included are
remote diagnostic support (optional), sensor testing,
statistics and status reports, contamination and
near service reports, "zone walk-test"
and "sounder-test".
Z/HS
Aspirating High Sensitivity Smoke Detection
Laser Technology
Ultra High Sensitivity
Infinitely Selectable Sensitivity
Expert Software
Automatic Environment
Evaluation
Area Identification
Sector Identification
Three alarm levels
Low maintenance
Dust Rejection
Meet latest standards
CE marked
ZP and Paradigm compatible
ZCS Conventional Fire Detection Systems
Reliable,economical protection, Complete systems
from a single source, Rapid early warning response
FIRE DETECTORS
3010(6110), 3020(6120), 3030(6130), 3040, 3060(6120&6130)
The 3000 and 6100 series of fire detectors are
remarkable for their low profile design, which
makes them suitable for the most demanding and
prestigious interior. The identical base, designed
and manufactured with care for the installers
allows for installation ease and provides interchangeability
of the fire detectors. Indication for a possible
fire condition with two diametrically situated
LEDs provides 360o angle visibility, with an option
of connecting a remote indicator. All models of
the 3000 Series are available in a relay output
version, intended for use in safety signaling
systems.
Conventional
Fire Alarm Control Panels
The FS4000 and FS5000 are series of conventional
fire alarm control panels of a new generation.
The panels are available in 2,4,8,16,24 and 32
zones configurations. All models are microprocessor
controlled and the parameters can be specified
in order to fit the individual requirements of
the protected area. The high reliability and universality
make these panels suitable for all kinds of fire
protection systems applications
