The Z-AB is a traditional range of fire alarm bells, rugged in construction and producing a clear ringing sound, for many years associated with fire detection and alarm systems. The units are reliable, well proven and have been used extensively as general purpose alarm sounders.

The ZF-MES1 is a low profile alarm sounder, developed for general purpose use in fire detection and alarm systems. It is aesthetically designed, offering a high sound output with low current consumption, allowing where required substantial numbers of sounders to be driven by relatively small control panels.

Easy to install, the sounder features an attractive high impact ABS plastic enclosure, available in either red or white, and is installed using a range of deep or shallow, plug in bases. Units are polarised for system monitoring and provided with both in and out wiring terminals.

The ZF-BDS1 is a flat, slim profile, electronic sounder, designed for ceiling mounting. By providing a platform for detector and base, the ZF-BDS1 offers a single installation point for both detector and sounder. It is especially cost effective in residential buildings, where the recommendations of BS 5839 Pt:1 1988 of 75 dBA sound output at each bed head, usually means the provision of a sounder in each bedroom.

When installed using 4 core cable, in place of separate circuits for both detectors and sounders, substantial reductions can often be achieved in both wiring costs and installation time. Units are polarised for system monitoring and provided with both in and out wiring terminals.

Developed for use in systems where audible alarms alone would be impractical, for example areas with high levels of background noise, residential establishments with occupants who may be infirmed or hard of hearing or manufacturing locations where intense industrial noise demands the use of ear protection, the ZF-XBS1 provides both audible and visual warning from a single unit.

Featuring a combination of outputs the ZF-XBS1, can minimise the number of installation points required throughout a building, significantly lowering both the capital value of equipment and the wiring costs of the completed system.

Designed to compliment audible alarms, the ZF-XB range of xenon beacons provides high intensity, visual signals for applications where alarm sounders alone would prove to be ineffective, or inappropriate for evacuating occupied premises.

In systems where high levels of background noise prohibit the use of audible alarms, residential establishments with occupants who may be infirmed or hard of hearing or manufacturing areas where intense industrial noise demands the use of ear protection, the visual indication of alarms may become necessary.

The 202 series strobe units are high output visual alarm devices, designed to compliment compatible fire detection system alarm circuits. They are ideal for applications where alarm sounders alone may prove ineffective for evacuating occupied premises.

In systems where high levels of background noise prohibit the use of audible alarms, residential establishments with occupants who may be infirmed or hard of hearing, or in manufacturing areas where intense industrial noise demands the use of ear protection, the visual indication of alarms may become necessary.

Genesis ceiling sounder/strobe units are designed to provide audiovisual alarm in a single enclosure.

The device is suitable for installation on ceilings or walls, in indoor applications where a high sound and light output are required and where alarm sounders alone may prove ineffective for evacuating occupied premises.

The Genesis range of combined sounder/strobes provides an audiovisual alarm in a single enclosure. All units are designed to provide high sound and light output.

Less than 25mm deep when flush fixed, Genesis' ultra low profile makes it ideal for most building types, as an audio visual alarm for applications where alarm sounders alone may prove ineffective for evacuating occupied premises.

Genesis is a range of low profile alarm sounders, developed for use in fire detection systems, where a high sound output is required from a small, discrete unit.

Less than 25mm deep when flushed fixed Genesis horn sounders are attractive and effective in most building types and applications.

Genesis strobe units provide visual alarms, with selectable light outputs across a wide intensity range.

Less than 25mm deep when flush fixed, Genesis' ultra low profile makes it ideal for most building types, as a visual alarm for applications where alarm sounders alone may prove ineffective for evacuating occupied premises.

The ZC6-CP1 is a conventional callpoint of rugged design, providing a manual means of initiating a fire alarm. The provision of all callpoints is a requirement of BS 5839 Part1:1988 Code of practice for Fire Detection and Alarm Systems in Buildings in all system types, both for the protection of life or property.

Complying with BS 5839 Part 2 and pr EN 54 Part 11, the ZC6-CP1 is approved by several international approval bodies, including the loss Prevention Certification Board (LPCB).

The ZC6-CPN1 is a waterproof, surface mounting, call point, providing a manual means of initiating a fire alarm. Rated at IP 67, the unit is designed for outdoor use, or applications where the ingress of water can be expected, for example where hygiene requirements demand regular washing or hosing down of the protected area.

Complying with BS 5839 Part 2 and pr EN 54 Part 11, the ZC6-CPN1 is approved by several international approval bodies, including the loss Prevention Certification Board (LPCB).

The ZF-MR1 is an unobtrusive door retaining unit designed to hold fire doors, in the open position, on busy corridors, yet on a fire condition allowing them to automatically close.

The unit consists of two separate parts, a door plate which is fitted to the fire door and a solenoid usually installed on the wall, or (using the bracket supplied separately) to the floor. Doors are held in the open position, against self closing mechanisms, when the solenoid is energised and are automatically released when current is switched by the fire alarm panel.

Z-DP3 duct probe units, enable a standard smoke detector or sensor to monitor the contents of extract ducting, be unaffected by dust and dirt in the air flow and be accessible for maintenance. Two versions are available, the Z-DP3-Z6BS1 for fitting a conventional detector and the Z-DP3-Z7SB1 for analogue addressable sensors, (either ordered separately).

The siting of detectors in confined or concealed spaces, often results in the red indicator on the device moulding becoming obscured or hidden. In order to show clearly the state of detectors when installed in areas such as ceiling or floor voids, the Z-RL1 remote LED indicator can be wired to the detector base and installed in any prominent position.

The Z-RL1 has a high intensity red LED indicator positioned centrally on a white, circular, plastic moulding. The unit is designed to fit onto a standard recessed or surface mounting circular conduit box and is connected by flying leads to the detector base wiring. Terminals are provided in both Z6-BS and Z6-BR series bases for connection to the remote unit.

The siting of detectors in confined or concealed spaces, often results in the red indicator on the device moulding becoming obscured or hidden. In order to show clearly the state of detectors when installed in areas such as ceiling or floor voids, the Z-RL3 remote LED indicator can be wired to the detector base and installed in any prominent position.

The Z-RL3 has a high intensity red LED indicator positioned centrally on a white, square plastic moulding. The unit is designed to fit onto a standard recessed or surface mounting square conduit box and is connected by flying leads to the detector base wiring. Terminals are provided in both Z6-BS and Z6-BR series bases for connection to the remote unit.