ZP7-SB1 common mounting base, allows any ZP700 analogue sensor to be removed or replaced without disconnecting loop wiring from sensor terminals. Sensors plug into the base unit with a simple twist and lock action, allowing quick and easy removal for cleaning and servicing, or reselection of device type should the usage of the protected area change.

The ZP7-RB1 sensor base, allows ZP700 analogue sensors to be semi recessed into ceiling tiles, when installed into buildings with suspended ceilings. The sensor low profile is further reduced without any increased difficulty in wiring termination.

Simply installed the base moulding passes through a clearance hole in the ceiling tile, where it is clamped between a retaining flange on the underside of the base moulding and a threaded collar, tightened down from above. Tile sections of up to 25 mm can be accommodated.